DJ Gongol & Associates
represents the Patterson Pump Company
, a subsidiary of the Gorman-Rupp Company
, in the states of Iowa and Nebraska. Patterson
pumps are made for a variety of applications in both clean water
and wastewater applications.
axial-flow pumps and mixed-flow pumps are ideal choices for the efficient pumping of high volumes of clear water and wastewater. When used in clean-water applications, Patterson
axial and mixed flow pumps can be installed with open line shafts. For wastewater applications, Patterson
axial and mixed flow pumps can be supplied with enclosed line shafts in order to prevent clogging and stringing.
axial- and mixed-flow pumps consist of a cast bowl assembly leading to an outer column and discharge elbow with an internal shaft linking the bowl assembly to the motor (mounted on an exterior stand). Because each bowl acts as a separate chamber, Patterson
axial-flow pumps and mixed-flow pumps can be designed to serve at a variety of heads, with each stage capable of up to 100' of TDH. A single Patterson
axial-flow pump or mixed-flow pump can deliver up to 500,000 gallons per minute.
|Axial-Flow, Mixed-Flow Pumps
||high-flow water service
|(*): maximum head per stage; multiple stages available|
mixed-flow pumps are available in both vertical and horizontal configurations, and can be custom-fabricated for capacities greater than those shown above.
For more information on the Patterson
axial and mixed-flow pump, please use our request form
last revised 10.19.2005