Palmer-Bowlus Flumes:

All dimensions are per the United States Department of the Interior Water Measurement Manual. Flume side walls are 1/4" thick. Each Palmer-Bowlus flume typically has an overall length of four times the throat width, plus 1" (i.e., 10" Palmer-Bowlus flumes are typically 41" long).

An isophthalic polyester resin is used throughout in fabrication, with all inside surfaces having a 15-mil layer of white gelcoat containing UV inhibitors.

A 2" wide by 1/4" thick flange is typically located along the top edge of each flume. In addition, each flume ordinarily has three 2" x 2" x 1/4"-thick fiberglass angles mounted across the top flange. All workmanship is in accordance with the NBS PS 15-69 product standard.

Prices are subject to change without prior notice. No stilling wells or staff gauges are included with Palmer-Bowlus flumes.

Palmer-Bowlus flumes
FRP 4-inch throat width Palmer-Bowlus flume without staff gauge 4-inch throat width Palmer-Bowlus flume without staff gauge Click for more specifications Normal lead time: Generally about 4-6 weeks	$399.00
FRP 6-inch throat width Palmer-Bowlus flume without staff gauge 6-inch throat width Palmer-Bowlus flume without staff gauge Click for more specifications Normal lead time: Generally about 4-6 weeks	$459.00
FRP 8-inch throat width Palmer-Bowlus flume without staff gauge 8-inch throat width Palmer-Bowlus flume without staff gauge Click for more specifications Normal lead time: Generally about 4-6 weeks	$519.00
FRP 10-inch throat width Palmer-Bowlus flume without staff gauge 10-inch throat width Palmer-Bowlus flume without staff gauge Click for more specifications Normal lead time: Generally about 4-6 weeks	$609.00
FRP 12-inch throat width Palmer-Bowlus flume without staff gauge 12-inch throat width Palmer-Bowlus flume without staff gauge Click for more specifications Normal lead time: Generally about 4-6 weeks	$769.00
FRP 15-inch throat width Palmer-Bowlus flume without staff gauge 15-inch throat width Palmer-Bowlus flume without staff gauge Click for more specifications Normal lead time: Generally about 4-6 weeks	$1039.00
FRP 18-inch throat width Palmer-Bowlus flume without staff gauge 18-inch throat width Palmer-Bowlus flume without staff gauge Click for more specifications Normal lead time: Generally about 4-6 weeks	$1139.00
FRP 21-inch throat width Palmer-Bowlus flume without staff gauge 21-inch throat width Palmer-Bowlus flume without staff gauge Click for more specifications Normal lead time: Generally about 4-6 weeks	$1299.00

Prices subject to change without notice

last revised June 2010